tire repair seal,tire repair plug,tire patch,tire sealant,emergency tools kit
1.Jinshancheng car emergency tools bag make you have a nice trip,it’s characters are fast repair,after repair tire can use long time.
2.Wide range of applications:automotive,agricultural vehicles,tricycles,motorcycles,bicycles,and all kinds of vacuum tire.
3.Quality guarantee:Jinshancheng inflator quality guarantees time is three years,other products all are support no reason to returned within seven days and lifetime warranty except inflator.
Inflator (have light) instructions
1.Insert cigarette lighter of inflator into cigarette lighter socket,or clip car positive and negative electrode by crocodile clip,pay attention to not inverse(red is positive electrode,black is negative electrode )
2.Start the engine open the switch
3.Connect the air cock to tire valve directly when inflating
4.Note the dial indicators of pressure gauge when inflating,turn off the switch after up to the rated value,pull the air cock(air pressure rated value usually is 28-35PSI)
Tire repair tools instruction :
1.Use a spray bottle to confirm the repair site, mark it.
2.Remove the prickled part with tire repair tools by inserting it through the hole of the prickled part. Repeated rotation around the hole cleaning, confirm no dust.
3. Select suitable tire seal specifications, placed on the special tool, pull out special cone at the same time, quickly use tire seal inserted into the hole, fixed appropriate position, rotate 360 degrees and pull out the special tool.
Cut off the extra tire seal from tyre surface, guaranteed the tire appearance.
During operating, it is strictly prohibited to tire seal and special tool surface stained with oil contamination.
6.use liquid soap or detergent diluted solution to this site to observe if there are bubbles. If there is no bubbles that successfully repaired.
1.Please start the engine first before inflate,strong the power,not waste the battery.
2.Inflator should be used under DC12V18A,if output voltage is AC110V/230V,please use voltage convertor .
3.Usually,air pressure can up to 30PIS within 3 minutes,if pressure value rising suddenly(up to 100PSI),please pull the air cock from tire valve immediately.Repeat the operation,otherwise pressure gauge and electrical machine will be damaged.
4.Note when inflating,check it don’t let the pressure too high,not place it in wet environment,far away children.
5.Clean cigarette lighter socket and your positive and negative electrode,protect it the same time to avoid broken,ensure nice operate ,inflator can not work more than 10 minutes,must cooling to 10 minutes after use can be used again.
6(This is very important) The electricity is very big when this inflator start,please don’t start switch when connect to the tire,otherwise it can destroy car fuse because the big electricity,the right way is start the switch,after it works normal,then connect to tire to inflate.If turn off the switch when operating,should start again,also need pull the air cock first,otherwise it is possible to broken the car fuse.
Our company was founded in the early of 1990’s,is lied in ANSHAN city which is called the steel capital and having advantage traffics.Main products of our company: cold mending adhesive strip, cold mending adhesive patch, mushroom whole filled cold mending adhesive patch, cold mending rubber solution,mending tyre needle, tools for tyre repair, wheel balance weighter, tyre valves, etc. The company has strong technology foundation, excellent equipmentl, advantage technics...